DX-RACON-01 Single-Band X-Band Marine Radar Beacon for Buoys and Lighthouses
Product Summary
DX-RACON-01 Single-Band X-Band Marine Radar Beacon for Buoys and Lighthouses Product Summary The DX-RACON-01 Single-Band is an X-band radar beacon designed to give navigation buoys, lighthouses and fixed marine marks a recognizable identity on vessel radar. It receives compatible radar interrogation ...
Product Custom Attributes
Basic Properties
Trading Properties
Product Description
The DX-RACON-01 Single-Band is an X-band radar beacon designed to give navigation buoys, lighthouses and fixed marine marks a recognizable identity on vessel radar. It receives compatible radar interrogation and returns a configurable Morse-coded response. Its integrated FRP housing provides an IP68 enclosure for marine installation, while a DC 9–36 V input and RS485 interface support site power and equipment configuration.
| Attribute | Specification |
|---|---|
| Product type | Single-band X-band marine radar beacon / RACON |
| Operating frequency | 9300–9500 MHz |
| Response codes | A–Z, 0–9, NW, NE, SW, SE |
| Horizontal coverage | 360° omnidirectional |
| Response delay | ≤0.5 μs |
| Input voltage | DC 9–36 V, typically DC 12 V |
| Average consumption | ≤2 W at a 1:1 operating/silent ratio |
| Communication interface | RS485 |
| Housing | Integrated FRP cylindrical housing |
| Ingress protection | IP68 |
| Operating temperature | −40°C to +70°C |
| Antenna gain | 7 dB; optional 10 dB |
A navigation mark may be visible on radar but difficult to identify when other targets appear nearby. The DX-RACON-01 Single-Band adds a coded radar response to the designated mark, helping vessel crews associate the indication on their display with the correct buoy, lighthouse or fixed beacon.
This version operates on X-band at 9300–9500 MHz. When it receives interrogation from a compatible marine radar, it returns the code assigned to that installation. The response provides a radar identification reference alongside the site’s visual marking equipment.
The DX-RACON-01 Single-Band is intended for projects requiring X-band response. If the marking specification also requires S-band identification, a dual-band configuration should be selected.
X-band radar is commonly used for detailed observation in harbour approaches, channels and coastal waters. In these areas, buoys may appear on the same radar display as vessels, breakwaters, shore structures and other nearby objects.
The DX-RACON-01 works within that X-band environment. Its coded response helps the crew identify the designated aid to navigation among surrounding radar targets. This is relevant at channel entrances, turning points and other locations where knowing which mark is on the screen matters to navigation.
Before selecting the single-band version, confirm that X-band is the radar band specified for the vessels and waters the mark serves.
When a compatible X-band vessel radar interrogates the RACON, the DX-RACON-01 transmits its configured identification code. On the radar display, the response appears as a recognizable coded trace extending from the marked location.
Available codes include A–Z, 0–9, NW, NE, SW and SE. The project can assign a code to the navigation mark according to its marking plan, then confirm that code during equipment setup and acceptance.
A conventional radar echo indicates that a target is present. The assigned RACON code helps the operator identify the specific mark associated with that response. Its appearance on the display will depend on the vessel radar and its settings.
Vessels can approach a buoy or fixed beacon from different directions. The DX-RACON-01 Single-Band provides 360° omnidirectional horizontal coverage to receive compatible radar interrogation around the installation.
The antenna should still be placed where it has a clear radar line of sight over the intended service waters. Mounting height, nearby structures and the orientation of the complete installation should be reviewed during site design.
Before deployment, the project team can check the operating frequency, assigned code, power condition and basic equipment response. The RS485 interface supports parameter configuration and equipment checks.
Once installed, observing the response on a compatible vessel radar provides a practical view of what mariners will see. Radar type, antenna height, display settings and surrounding targets may affect the final presentation.
If the project sets a specific operating-distance requirement, that requirement should be assessed against the proposed installation and confirmed through the agreed field-check procedure.
For an X-band single-band project, confirm that the installation can:
- Respond to the X-band radar used by vessels in the service area
- Display the identification code assigned to the mark
- Cover the intended vessel approach directions
- Fit the available mounting location and DC power system
- Meet the project’s practical operating-range requirement
The radar band and assigned code should be stated clearly in the purchase specification. This helps the supplied configuration match the intended use and gives the installation team defined settings to verify.
The DX-RACON-01 Single-Band uses an integrated cylindrical FRP housing. The product specification lists IP68 protection and an operating temperature range of −40°C to +70°C for exposed marine installations.
Its external power input accepts DC 9–36 V. Published average consumption is ≤2 W when the operating and silent periods are set at a 1:1 ratio. That condition should be included when calculating battery reserve or assessing an external solar and battery supply.
The housing, mounting surface and cable connections should be reviewed together before installation so that the site arrangement supports both radar operation and long-term maintenance.
To prepare the correct DX-RACON-01 Single-Band configuration, confirm:
- Installation location and mounting arrangement
- X-band radar requirement
- Assigned Morse identification code
- Available DC power supply
- Required practical operating range
- Any project-owner or local authority requirements
These details allow the equipment settings and installation requirements to be checked before delivery.
No. This is the single-band X-band configuration. If the project requires identification on both X-band and S-band radar, specify a dual-band version.
Yes. The supported letters, numbers and directional codes can be assigned according to the project’s marking plan. The chosen code should be recorded and checked during commissioning.
It may use an existing system that provides a suitable DC 9–36 V supply and sufficient capacity. For solar-powered sites, calculate battery reserve using the actual operating settings and the power needs of other equipment on the buoy.
Contact Our Experts And Get A Free Consultation!
To build a marine brand from China that the world can rely on.